Wood Preservative, Wood Anti Blue Agent

• Customization: Available
• CAS No.: 521-9-3
• Formula: Cr2na2o7
• Model NO.: 200kg
• Source: Inorganic Acid
• Appearance: Oily Liquid
• Grade Standard: Industrial Grade
• Colour: Light Yellow
• Density: 1.02g/Ml
• pH: 5.0- 10.0
• Decomposition Temperature: 230ºC
• Flammability: Non-Combustible
• Transport Package: Barrel
• Specification: 200kg/1000kg
• Trademark: SHSC
• Origin: China
• HS Code: 3808940090
• Production Capacity: 500000

Product Description

SC-FM008 preservative is a concentrated wood anti blue agent that integrates various wood anti blue agents and anti mold agents. It can be directly mixed with water for easy use. This product has a natural affinity with wood fibers and can form covalent bonds with the hydroxyl groups of the fibers, firmly fixing it on the surface of the wood and protecting it from blue discoloration for a long time. SC-FM008 has excellent penetration ability, which can penetrate into the interior of wood, kill contaminated bacteria and mold spores inside the wood, and play an efficient role in preventing mold and blue transformation. SC-FM008 is very safe and environmentally friendly, and the selection of materials takes into account the global regulatory safety system. SC-FM008 processing Used wood and bamboo can come into direct contact with food.

1. Broad spectrum antifungal and antibacterial properties: It has a very wide spectrum of antibacterial properties and has a significant killing effect on both fungi and bacteria (see MIC parameter table);
2. Excellent anti mold ability: Bamboo, wood, or bamboo and wood products treated with soaking anti blue agent SC-FM008 have
Very good anti mold ability, with an anti mold level of 0 and an anti algae level of 0. The antibacterial rate of common bacteria is greater than 99%;
3. It has good compatibility with water and solvents, and is not easy to migrate and lose. Can protect products from mold and algae substances for more than 1 year
Intrusion and extended service life;
4. Safe and environmentally friendly, with low dosage, it will not cause harm to human health and the environment;
5. It does not affect any chemical or physical properties of its products, nor does it affect the adhesion of other chemical additives on the surface of wood and bamboo products;

Usage
1. Soaking method: This product is diluted with 3-4% water, then soaked in wood for 5-10 minutes. Remove and air dry.
2. Brushing or spraying method: This product is diluted with water at a ratio of 4%, and then directly coated on the surface of the wood. The surface of the wood is noticeably moist and naturally air dried. Apply 50g/square meter, spray 60g/square meter, and the weight of the diluted agent used is.
3. Pressure method: This product is diluted with water in a ratio of 3-4%, and the medicine is pressed into the wood through pressure. The final content of the medicine in the wood should be higher than 120mg/KG.
Note: It is recommended to use tap water for the water mentioned in use. River and lake water themselves contain a large amount of microorganisms.
Note: When using, tap water should be used, as river and lake water contain a large amount of microorganisms, which may cause partial consumption of chemicals.